
0 986 435 503 Cummins 5.9L (Early)
2003 – 2004.5 Dodge Cummins Pick-up (Common-Rail).
BOSCH CP3 Fuel system with SOLENOID injectors.
- Injector: Pre-torque hold-down bolt to 44 inch-pounds to ensure injector is seated & centered.
- Feed tube: Pre-torque to 11 lb-ft. to ensure feed tube is seated & centered.
- Injector hold-down bolts final install: 89 inch-lbs.
- Feed tube final install: 37 lb-ft.
- Rocker Arm mounting bolts: 27 lb-ft.
- Wire connector nuts final install: 11 inch-pounds. DO NOT OVER TORQUE!
We also offer feed tubes, o-rings, injection pressure regulators (sometimes called mprop or fsa), and many other complementary parts for this truck.
*NOTE* Injector installation torque is critical to injector life and performance. Ensure the injector bore and injector seat are SPOTLESSLY CLEAN before installing. Debris/carbon can prevent injectors from sealing correctly which can create leaks or poor running complaints.
0 986 435 505 Cummins 5.9L (Late)
2004.5 – 2007 Dodge Cummins Pick-up (Common-Rail).
BOSCH CP3 Fuel system with SOLENOID injectors.
- Injector: Pre-torque hold-down bolt to 44 inch-pounds to ensure injector is seated & centered.
- Feed tube: Pre-torque to 11 lb-ft. to ensure feed tube is seated & centered.
- Injector hold-down bolts final install: 89 inch-lbs.
- Feed tube final install: 37 lb-ft.
- Rocker Arm mounting bolts: 27 lb-ft.
- Wire connector nuts final install: torque to 11 inch-pounds. DO NOT OVER TORQUE!
NW Fuel offers feed tubes, o-rings, fuel pressure regulators and many other complementary parts for this truck.
*NOTE* Injector installation torque is critical to injector life and performance. Ensure the injector bore and injector seat are SPOTLESSLY CLEAN before installing. Debris/carbon can prevent injectors from sealing correctly which can create leaks or poor running complaints.
0 986 435 518 Cummins 6.7L
2008 – 2012 Dodge Cummins Pick-up (Common-Rail).
BOSCH CP3 Fuel system with SOLENOID injectors.
- Injector: Pre-torque hold-down bolt to 44 inch-pounds to ensure injector is seated & centered.
- Feed tube: Pre-torque to 11 lb-ft. to ensure feed tube is seated & centered.
- Injector hold-down bolts final install: 71 inch-lbs.
- Feed tube final install: 37 lb-ft.
- Rocker Arm mounting bolts: 27 lb-ft.
- Wire connector nuts final install: torque to 11 inch-pounds. DO NOT OVER TORQUE!
NW Fuel offers feed tubes, o-rings, fuel pressure regulators and many other complementary parts for this truck.
*NOTE* Injector installation torque is critical to injector life and performance. Ensure the injector bore and injector seat are SPOTLESSLY CLEAN before installing. Debris/carbon can prevent injectors from sealing correctly which can create leaks or poor running complaints.
*NOTE* These injectors have TRIM (IQA) CODES that will need to be programmed into the ECM with a Scan Tool. Ensure the ECM has the correct trim codes programmed to get the longest life and best performance from the injectors. Contact us anytime if you require assistance.
Read the Latest News and Updates About Diesel Fuel


What Does a Cleaning Room Look Like in a Diesel Injector Repair Shop?

Sewing the Fabric of Community

Why Do 6.0L Injectors Fail?

Why Do 2003-2007 Dodge 5.9L Cummins Fail?

Diesel Emissions Control Systems

FAQs for the 2001-2004 Chevrolet 6.6L LB7 Duramax Engine

Replacing Duramax Fuel Injectors
